Harvester 1050H - Technical Data


 

Weight with basic equipment

14 700 kg

Fuel tank

330 Litres

Engine

Engine

Cummins, 6 cylinder, Turbo charger, Intercooler, Electronically governed injection.

Capacity (liters)

6,7

Torque (Nm) at rpm

949/1400

Power output kW (HP) at rpm

164(220)/2000

Other

Two separate, electronically adjustable constant-speeds automatically actuated, EC stage-3 approved.

Transmission

Tractive force net

More than 12 tons.

Hydrostatic drive

Computer controlled capacity control. Tank completely separated from the working hydraulics. Synthetic oil.

Gearbox

Power-Shift 2-steps gearbox. 1th gear 0 -9,1 km/h, 2nd gear 2,0 - 25 km/h.

Gearwheel bogies

Cast iron, roller path bearing.

Differential locks

Separately controlled with 100 % locking.

Hub reduction

On every wheel.

Steering system

Servo-steering. Electrical proportional terrain steering in separate lever.

Steering torque (kNm)

42

Steering angle

+/- 43°

Brakes

Four oil-immersed multiple-disc brakes in front and rear differentials. Parking and emergency brake actuating all multiple-disc brakes and actuated automatically in neutral.

Other

Foot pedals for forward/backward and driving speed. Warning system with fault indication in plain text and acustic/optical signal. Fault tracing via computer.

Hydraulics

Working hydraulics

Constant pressure/loadsensing system. Own tank completely separated from the hydrostatic hydraulics. Synthetic oil.

Pump (cc)

170 Variable, adjustable flow rate limitation via GreControl

Working pressure (MPa)

24

Other

Tanks with electrical re-filling device via filter. Thermostat controlled hydraulic fan for the cooling devices of hydrostat and working hydraulics.

Boom/Boom Control

Boom/Boom Control

Loglift (V)

181

Reach length (m)

10,0

Gross lifting torque (kNm)

138

Other

IQAN Experience. individual programme storage for 5 operators.

Electrics

Voltage (V)

24

Lights

16 st Xenon.

Generator / Battery

l75 / 2x750 (maintenance-free)

Other

Travel lights according to law.

Harvester Head/Measuring

Modell

SP 561 LF with maximum root pruning 60 cm.

Kvistningsdiameter (cm)

43 tip-tip

Roller motors (cc)

Poclain 514, 560 alternatively 625

Other

The patented construction of the feed roller holder carries the trunk during processing. Automatic chain tensioner SC 100, auto-cut, loghold, quickcut, proportional pressure on pruning knifes and feed rollers adjusted by Dasa4. Dasa4 with large colour screen, loose keyboard and Canbus communication. Prepared for GPS, e-mail etc


We reserve the right to change specification and design. The machines shown in the illustrations can be equipped with extras. All measures and values are approximate and apply to a standard machine.